Home > O Error > I O Error Dev 08 05

I O Error Dev 08 05

Contents

User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 International License. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours_and_Msec 0x0032 000 000 000 Old_age Always - 930900h+16m+05.280s 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 120 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 119 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 119 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 92149 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 65535 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 31 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 65535 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 92149 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 42248 249 NAND_Writes_1GiB 0x0013 100 100 000 Pre-fail Always - 5170 SMART Error Log not supported SMART Self-test Log not supported SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. You signed in with another tab or window. It requires you to compute the location of the bad sectors; the chance of mistakes (especially since in their example the LBA numbers seem to be in hex (0x prefix), for me they seem to be decimal.) and other issues (my root partition is encrypted and I have no idea how LUKS reacts to sectors being overwritten) is substantial.

I was watching the /var/log/kern.log, until I found out that whenever this message appear from the log ata1.00: revalidation failed (errno=-5) each of my applications, automatically close, commands from terminal starts to become unsuable because the system becomes read only. or what could it possibly mean? (That that disk is broken and I have to get the vendor to give me a new one? When I paste "blacklist floppy" it says "cklist floppy". I'm not exactly sure how to do that but I will try and let you know.

End_request I/o Error Dev Sda Sector

Please visit this page to clear all LQ-related cookies. If you need to reset your password, click here. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode.

Last edited by sudodus; July 11th, 2014 at 07:55 AM. You can verify this with the following command (this solution works with RHEL, CentOS, Redhat, Ubuntu/Debian and other Linux distros) : # lsmod | grep -i floppy Output:floppy 95465 0Open file called /etc/modprobe.d/blacklist: # vi /etc/modprobe.d/blacklist Listing a module (driver name) in this file prevents the hotplug scripts from loading it. Enter user and password and su to root. Blk_update_request Io Error Registration is quick, simple and absolutely free.

Are you new to LinuxQuestions.org? End_request I/o Error Dev Sector If you would like to refer to this comment somewhere else in this project, copy and paste the following link: masc - 2010-03-06 I would be very surprised if ext4 would still have these kind of severe bugs, corrupting fs when it's full, after having stable release since 1,5 years. Just tried to repeat the test with ext3, failing already at mkfs.ext3: [ 507.436112] end_request: I/O error, dev vdd, sector 2930245504 [ 507.436119] ratelimit: 3 callbacks suppressed [ 507.436125] Buffer I/O error on device vdd, logical block 366280688 [ 507.436127] lost page write due to I/O error on vdd [ 507.436679] end_request: I/O error, dev vdd, sector 2930245568 [ 507.436682] Buffer I/O error on device vdd, logical block 366280696 [ 507.436683] lost page write due to I/O error on vdd [ 507.436687] Buffer I/O error on device vdd, logical block 366280697 [ 507.436689] lost page write due to I/O error on vdd [ 507.436692] Buffer I/O error on device vdd, logical block 366280698 [ 507.436693] lost page write due to I/O error on vdd [ 507.436696] Buffer I/O error on device vdd, logical block 366280699 [ 507.436697] lost page write due to I/O error on vdd [ 507.436700] Buffer I/O error on device vdd, logical block 366280700 [ 507.436702] lost page write due to I/O error on vdd [ 507.436704] Buffer I/O error on device vdd, logical block 366280701 [ 507.436706] lost page write due to I/O error on vdd [ 507.436708] Buffer I/O error on device vdd, logical block 366280702 [ 507.436710] lost page write due to I/O error on vdd [ 507.436712] Buffer I/O error on device vdd, logical block 366280703 [ 507.436714] lost page write due to I/O error on vdd [ 720.380113] INFO: task mkfs.ext3:2645 blocked for more than 120 seconds. [ 720.380118] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 720.380121] mkfs.ext3 D 0000000000000000 0 2645 2458 0x00000004 [ 720.380126] ffff88001259b9a8 0000000000000046 0000000000001000 0000000000015880 [ 720.380141] ffff88003862c7c0 0000000000015880 0000000000015880 0000000000015880 [ 720.380145] 0000000000015880 ffff88003862c7c0 0000000000015880 0000000000015880 [ 720.380149] Call Trace: [ 720.380194] [] ? Run smartctl -a /dev/sdb (change the device name according to where it's now located) and see what that reports.

Note that registered members see fewer ads, and ContentLink is completely disabled once you log in. Blk_update_request I/o Error Ubuntu Fix? Adv Reply July 11th, 2014 #4 teodyseguin View Profile View Forum Posts Private Message First Cup of Ubuntu Join Date Mar 2013 Beans 7 Re: Error ID I/O error, dev sda, sector Okay, I made a clean install again. SCT Feature Control supported.

End_request I/o Error Dev Sector

The floppy driver is not being used. go to this web-site General Purpose Logging supported. End_request I/o Error Dev Sda Sector Selective Self-test supported. End_request I/o Error Dev Sda Sector 0 no, do not subscribeyes, replies to my commentyes, all comments/replies instantlyhourly digestdaily digestweekly digest Or, you can subscribe without commenting.

I use 8x4tb wd red in a raid-z2 behind a lsi sas3008 (mpt3sas). This is done purposely to provide readers with practical examples based on the knowledge they gain from UNIX Fundamentals and HP-UX System Administration chapters. 2. We are exactly the people our parents always warned us about. it is also possible to do: sudo modprobe -r floppy so there will be no need to reboot Reply Link Aaron February 18, 2008, 6:12 pmwhere do u do the lsmod | grep -i floppy thing? End_request I/o Error Dev Sda Sector Centos

I was having these messages for a long time and with a quick look have found the solution in your web. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 1d 2a 97 ec Error: UNC 3 sectors at LBA = 0x0c972a1d = 211233309 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 18 2a 97 ec 08 00:03:00.416 READ DMA ef 10 02 00 00 00 a0 08 00:03:00.415 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 08 00:03:00.413 IDENTIFY DEVICE ef 03 45 00 00 00 a0 08 00:03:00.413 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 08 00:03:00.413 SET FEATURES [Reserved for Serial ATA] Error 513 occurred at disk power-on lifetime: 5654 hours (235 days + 14 hours) When the command that caused the error occurred, the device was active or idle. kthread+0x8e/0xa0 Mar 30 00:26:42 jhdhr kernel: [] ? After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 00 00 00 a0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 00 00 00 00 00 a0 08 00:03:39.320 IDENTIFY DEVICE c8 00 80 80 28 97 ec 08 00:03:30.939 READ DMA c8 00 80 20 2a 97 ec 08 00:03:27.409 READ DMA c8 00 90 c0 5b e2 e5 08 00:03:27.394 READ DMA ca 00 98 00 9b 98 ec 08 00:03:27.393 WRITE DMA Error 516 occurred at disk power-on lifetime: 5654 hours (235 days + 14 hours) When the command that caused the error occurred, the device was active or idle.

We're going to need to add some code to check the request_queue->rpm_status to determine when a device has been suspended. Blk_update_request I/o Error Dev Sda Sector SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. wake_bit_function+0x0/0x40 [ 720.380247] [] ?

no Running additional passes to resolve blocks claimed by more than one inode...

The laptop passes the simple diagnostics, but when you really start to use it, problems show up. Code: dmesg [ 681.472852] ata1.00: failed command: READ DMA EXT [ 681.472856] ata1.00: cmd 25/00:00:f8:eb:bd/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 681.472856] res 51/84:b0:48:ec:bd/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 681.472858] ata1.00: status: { DRDY ERR } [ 681.472859] ata1.00: error: { ICRC ABRT } [ 681.472866] ata1.00: hard resetting link [ 681.791147] ata1.01: hard resetting link [ 682.818130] ata1.01: failed to resume link (SControl 0) [ 682.974052] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 682.974067] ata1.01: SATA link down (SStatus 0 SControl 0) [ 682.998511] ata1.00: configured for UDMA/33 [ 682.998861] ata1: EH complete [ 683.215898] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 683.215901] ata1.00: BMDMA stat 0x26 [ 683.215904] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 683.215906] ata1.00: failed command: READ DMA EXT [ 683.215909] ata1.00: cmd 25/00:88:a0:16:cb/00:00:1d:00:00/e0 tag 0 dma 69632 in [ 683.215909] res 51/84:38:f0:16:cb/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 683.215911] ata1.00: status: { DRDY ERR } [ 683.215912] ata1.00: error: { ICRC ABRT } [ 683.215918] ata1.00: hard resetting link [ 683.533423] ata1.01: hard resetting link [ 684.560454] ata1.01: failed to resume link (SControl 0) [ 684.716356] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 684.716370] ata1.01: SATA link down (SStatus 0 SControl 0) [ 684.740813] ata1.00: configured for UDMA/33 [ 684.741165] ata1: EH complete [ 685.034719] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 685.034725] ata1.00: BMDMA stat 0x26 [ 685.034729] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 685.034732] ata1.00: failed command: READ DMA EXT [ 685.034739] ata1.00: cmd 25/00:80:50:ab:c7/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 685.034739] res 51/84:30:a0:ab:c7/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 685.034742] ata1.00: status: { DRDY ERR } [ 685.034744] ata1.00: error: { ICRC ABRT } [ 685.034753] ata1.00: hard resetting link [ 685.351687] ata1.01: hard resetting link [ 686.378690] ata1.01: failed to resume link (SControl 0) [ 686.534516] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 686.534528] ata1.01: SATA link down (SStatus 0 SControl 0) [ 686.559018] ata1.00: configured for UDMA/33 [ 686.559366] ata1: EH complete [ 686.624986] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 686.624989] ata1.00: BMDMA stat 0x26 [ 686.624992] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 686.624994] ata1.00: failed command: READ DMA EXT [ 686.624997] ata1.00: cmd 25/00:00:f0:6a:c1/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 686.624997] res 51/84:40:b0:6b:c1/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 686.624999] ata1.00: status: { DRDY ERR } [ 686.625000] ata1.00: error: { ICRC ABRT } [ 686.625006] ata1.00: hard resetting link [ 686.942134] ata1.01: hard resetting link [ 687.969136] ata1.01: failed to resume link (SControl 0) [ 688.125029] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 688.125040] ata1.01: SATA link down (SStatus 0 SControl 0) [ 688.149517] ata1.00: configured for UDMA/33 [ 688.149860] ata1: EH complete [ 688.243204] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 688.243208] ata1.00: BMDMA stat 0x26 [ 688.243211] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 688.243213] ata1.00: failed command: READ DMA EXT [ 688.243217] ata1.00: cmd 25/00:00:60:11:c0/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 688.243217] res 51/84:30:30:12:c0/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 688.243220] ata1.00: status: { DRDY ERR } [ 688.243221] ata1.00: error: { ICRC ABRT } [ 688.243228] ata1.00: hard resetting link [ 688.560572] ata1.01: hard resetting link [ 689.587564] ata1.01: failed to resume link (SControl 0) [ 689.743467] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 689.743478] ata1.01: SATA link down (SStatus 0 SControl 0) [ 689.767933] ata1.00: configured for UDMA/33 [ 689.768277] ata1: EH complete [ 689.833382] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 689.833387] ata1.00: BMDMA stat 0x26 [ 689.833391] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 689.833394] ata1.00: failed command: READ DMA EXT [ 689.833400] ata1.00: cmd 25/00:00:d0:ff:c7/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 689.833400] res 51/84:80:50:00:c8/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 689.833404] ata1.00: status: { DRDY ERR } [ 689.833406] ata1.00: error: { ICRC ABRT } [ 689.833415] ata1.00: hard resetting link [ 690.151010] ata1.01: hard resetting link [ 691.178027] ata1.01: failed to resume link (SControl 0) [ 691.333915] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 691.333929] ata1.01: SATA link down (SStatus 0 SControl 0) [ 691.368811] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2) [ 691.368815] ata1.00: revalidation failed (errno=-5) [ 696.329020] ata1.00: hard resetting link [ 696.648694] ata1.01: hard resetting link [ 697.675713] ata1.01: failed to resume link (SControl 0) [ 697.831615] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 697.831627] ata1.01: SATA link down (SStatus 0 SControl 0) [ 697.856091] ata1.00: configured for UDMA/33 [ 697.856435] ata1: EH complete [ 697.876932] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 697.876935] ata1.00: BMDMA stat 0x26 [ 697.876937] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 697.876939] ata1.00: failed command: READ DMA EXT [ 697.876943] ata1.00: cmd 25/00:00:d0:ff:c7/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 697.876943] res 51/84:20:b0:00:c8/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 697.876945] ata1.00: status: { DRDY ERR } [ 697.876947] ata1.00: error: { ICRC ABRT } [ 697.876954] ata1.00: hard resetting link [ 698.195208] ata1.01: hard resetting link [ 699.222204] ata1.01: failed to resume link (SControl 0) [ 699.378120] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 699.378134] ata1.01: SATA link down (SStatus 0 SControl 0) [ 699.402614] ata1.00: configured for UDMA/33 [ 699.402957] ata1: EH complete [ 699.421821] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 699.421824] ata1.00: BMDMA stat 0x26 [ 699.421827] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 699.421829] ata1.00: failed command: READ DMA EXT [ 699.421833] ata1.00: cmd 25/00:00:d0:ff:c7/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 699.421833] res 51/84:d0:00:00:c8/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 699.421835] ata1.00: status: { DRDY ERR } [ 699.421836] ata1.00: error: { ICRC ABRT } [ 699.421843] ata1.00: hard resetting link [ 699.737720] ata1.01: hard resetting link [ 700.764706] ata1.01: failed to resume link (SControl 0) [ 700.920632] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 700.920645] ata1.01: SATA link down (SStatus 0 SControl 0) [ 700.945095] ata1.00: configured for UDMA/33 [ 700.945441] ata1: EH complete [ 701.195805] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 701.195808] ata1.00: BMDMA stat 0x26 [ 701.195811] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 701.195813] ata1.00: failed command: READ DMA EXT [ 701.195816] ata1.00: cmd 25/00:00:a0:73:c1/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 701.195816] res 51/84:80:20:74:c1/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 701.195818] ata1.00: status: { DRDY ERR } [ 701.195819] ata1.00: error: { ICRC ABRT } [ 701.195825] ata1.00: hard resetting link [ 701.511981] ata1.01: hard resetting link [ 702.538964] ata1.01: failed to resume link (SControl 0) [ 702.694903] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 702.694919] ata1.01: SATA link down (SStatus 0 SControl 0) [ 702.719364] ata1.00: configured for UDMA/33 [ 702.719710] ata1: EH complete [ 702.837017] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 702.837020] ata1.00: BMDMA stat 0x26 [ 702.837023] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 702.837026] ata1.00: failed command: READ DMA EXT [ 702.837030] ata1.00: cmd 25/00:d8:28:a7:c1/00:00:1d:00:00/e0 tag 0 dma 110592 in [ 702.837030] res 51/84:88:78:a7:c1/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 702.837033] ata1.00: status: { DRDY ERR } [ 702.837034] ata1.00: error: { ICRC ABRT } [ 702.837042] ata1.00: hard resetting link [ 703.154387] ata1.01: hard resetting link [ 704.181410] ata1.01: failed to resume link (SControl 0) [ 704.337303] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 704.337317] ata1.01: SATA link down (SStatus 0 SControl 0) [ 704.361777] ata1.00: configured for UDMA/33 [ 704.362119] ata1: EH complete [ 704.873571] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 704.873576] ata1.00: BMDMA stat 0x26 [ 704.873578] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 704.873580] ata1.00: failed command: READ DMA EXT [ 704.873583] ata1.00: cmd 25/00:a0:40:88:c3/00:00:1d:00:00/e0 tag 0 dma 81920 in [ 704.873583] res 51/84:20:c0:88:c3/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 704.873585] ata1.00: status: { DRDY ERR } [ 704.873586] ata1.00: error: { ICRC ABRT } [ 704.873593] ata1.00: hard resetting link [ 705.192408] ata1.01: hard resetting link [ 706.219430] ata1.01: failed to resume link (SControl 0) [ 706.375283] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 706.375298] ata1.01: SATA link down (SStatus 0 SControl 0) [ 706.394223] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2) [ 706.394228] ata1.00: revalidation failed (errno=-5) [ 711.370345] ata1.00: hard resetting link [ 711.690108] ata1.01: hard resetting link [ 712.717119] ata1.01: failed to resume link (SControl 0) [ 712.873000] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 712.873012] ata1.01: SATA link down (SStatus 0 SControl 0) [ 712.897484] ata1.00: configured for UDMA/33 [ 712.897770] ata1: EH complete [ 713.158852] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 713.158856] ata1.00: BMDMA stat 0x26 [ 713.158858] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 713.158860] ata1.00: failed command: READ DMA EXT [ 713.158864] ata1.00: cmd 25/00:f8:50:95:c7/00:00:1d:00:00/e0 tag 0 dma 126976 in [ 713.158864] res 51/84:08:40:96:c7/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 713.158865] ata1.00: status: { DRDY ERR } [ 713.158866] ata1.00: error: { ICRC ABRT } [ 713.158873] ata1.00: hard resetting link [ 713.476365] ata1.01: hard resetting link [ 714.503384] ata1.01: failed to resume link (SControl 0) [ 714.659288] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 714.659300] ata1.01: SATA link down (SStatus 0 SControl 0) [ 714.694185] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2) [ 714.694190] ata1.00: revalidation failed (errno=-5) [ 719.654379] ata1.00: hard resetting link [ 719.974076] ata1.01: hard resetting link [ 721.001060] ata1.01: failed to resume link (SControl 0) [ 721.156952] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 721.156966] ata1.01: SATA link down (SStatus 0 SControl 0) [ 721.181442] ata1.00: configured for UDMA/33 [ 721.181795] ata1: EH complete [ 721.204168] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 721.204171] ata1.00: BMDMA stat 0x26 [ 721.204174] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 721.204176] ata1.00: failed command: READ DMA EXT [ 721.204180] ata1.00: cmd 25/00:00:a8:a1:c7/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 721.204180] res 51/84:d0:d8:a1:c7/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 721.204182] ata1.00: status: { DRDY ERR } [ 721.204184] ata1.00: error: { ICRC ABRT } [ 721.204191] ata1.00: hard resetting link [ 721.520570] ata1.01: hard resetting link [ 722.547497] ata1.01: failed to resume link (SControl 0) [ 722.703466] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 722.703478] ata1.01: SATA link down (SStatus 0 SControl 0) [ 722.722287] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2) [ 722.722290] ata1.00: revalidation failed (errno=-5) [ 727.698562] ata1.00: hard resetting link [ 728.018253] ata1.01: hard resetting link [ 729.045263] ata1.01: failed to resume link (SControl 0) [ 729.201164] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 729.201177] ata1.01: SATA link down (SStatus 0 SControl 0) [ 729.225649] ata1.00: configured for UDMA/33 [ 729.225982] ata1: EH complete [ 729.993399] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 729.993403] ata1.00: BMDMA stat 0x26 [ 729.993405] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 729.993407] ata1.00: failed command: READ DMA EXT [ 729.993410] ata1.00: cmd 25/00:00:d8:3f:c7/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 729.993410] res 51/84:80:58:40:c7/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 729.993412] ata1.00: status: { DRDY ERR } [ 729.993413] ata1.00: error: { ICRC ABRT } [ 729.993420] ata1.00: hard resetting link [ 730.312030] ata1.01: hard resetting link [ 731.339022] ata1.01: failed to resume link (SControl 0) [ 731.494932] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 731.494943] ata1.01: SATA link down (SStatus 0 SControl 0) [ 731.519410] ata1.00: configured for UDMA/33 [ 731.519754] ata1: EH complete [ 731.832438] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 731.832441] ata1.00: BMDMA stat 0x26 [ 731.832444] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 731.832446] ata1.00: failed command: READ DMA EXT [ 731.832449] ata1.00: cmd 25/00:00:e8:6f:ca/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 731.832449] res 51/84:b0:38:70:ca/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 731.832451] ata1.00: status: { DRDY ERR } [ 731.832452] ata1.00: error: { ICRC ABRT } [ 731.832458] ata1.00: hard resetting link [ 732.150204] ata1.01: hard resetting link [ 733.177237] ata1.01: failed to resume link (SControl 0) [ 733.333157] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 733.333171] ata1.01: SATA link down (SStatus 0 SControl 0) [ 733.352026] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2) [ 733.352032] ata1.00: revalidation failed (errno=-5) [ 738.328246] ata1.00: hard resetting link [ 738.647905] ata1.01: hard resetting link [ 739.674945] ata1.01: failed to resume link (SControl 0) [ 739.830838] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 739.830850] ata1.01: SATA link down (SStatus 0 SControl 0) [ 739.855299] ata1.00: configured for UDMA/33 [ 739.855588] ata1: EH complete [ 740.665659] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 740.665663] ata1.00: BMDMA stat 0x26 [ 740.665665] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 740.665667] ata1.00: failed command: READ DMA EXT [ 740.665670] ata1.00: cmd 25/00:00:c0:be:c9/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 740.665670] res 51/84:b0:10:bf:c9/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 740.665672] ata1.00: status: { DRDY ERR } [ 740.665673] ata1.00: error: { ICRC ABRT } [ 740.665680] ata1.00: hard resetting link [ 740.981672] ata1.01: hard resetting link [ 742.008672] ata1.01: failed to resume link (SControl 0) [ 742.164596] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 742.164609] ata1.01: SATA link down (SStatus 0 SControl 0) [ 742.183310] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2) [ 742.183313] ata1.00: revalidation failed (errno=-5) [ 747.159648] ata1.00: hard resetting link [ 747.479366] ata1.01: hard resetting link [ 748.506360] ata1.01: failed to resume link (SControl 0) [ 748.662264] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 748.662276] ata1.01: SATA link down (SStatus 0 SControl 0) [ 748.686717] ata1.00: configured for UDMA/33 [ 748.687006] ata1: EH complete [ 750.250379] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 750.250382] ata1.00: BMDMA stat 0x26 [ 750.250385] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 750.250387] ata1.00: failed command: READ DMA EXT [ 750.250390] ata1.00: cmd 25/00:d0:68:3d:f1/00:00:1d:00:00/e0 tag 0 dma 106496 in [ 750.250390] res 51/84:b0:88:3d:f1/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 750.250392] ata1.00: status: { DRDY ERR } [ 750.250393] ata1.00: error: { ICRC ABRT } [ 750.250400] ata1.00: hard resetting link [ 750.568327] ata1.01: hard resetting link [ 751.595361] ata1.01: failed to resume link (SControl 0) [ 751.751268] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 751.751279] ata1.01: SATA link down (SStatus 0 SControl 0) [ 751.775716] ata1.00: configured for UDMA/33 [ 751.776005] ata1: EH complete [ 751.902468] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 751.902471] ata1.00: BMDMA stat 0x26 [ 751.902474] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 751.902476] ata1.00: failed command: READ DMA EXT [ 751.902479] ata1.00: cmd 25/00:88:f0:a5:c1/00:00:1d:00:00/e0 tag 0 dma 69632 in [ 751.902479] res 51/84:08:70:a6:c1/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 751.902481] ata1.00: status: { DRDY ERR } [ 751.902482] ata1.00: error: { ICRC ABRT } [ 751.902489] ata1.00: hard resetting link [ 752.218765] ata1.01: hard resetting link [ 753.245760] ata1.01: failed to resume link (SControl 0) [ 753.401674] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 753.401687] ata1.01: SATA link down (SStatus 0 SControl 0) [ 753.426116] ata1.00: configured for UDMA/33 [ 753.426460] ata1: EH complete [ 753.986512] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 753.986515] ata1.00: BMDMA stat 0x26 [ 753.986518] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 753.986520] ata1.00: failed command: READ DMA EXT [ 753.986523] ata1.00: cmd 25/00:70:60:75:e1/00:00:1d:00:00/e0 tag 0 dma 57344 in [ 753.986523] res 51/84:00:cf:75:e1/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 753.986525] ata1.00: status: { DRDY ERR } [ 753.986526] ata1.00: error: { ICRC ABRT } [ 753.986533] ata1.00: hard resetting link [ 754.304663] ata1.01: hard resetting link [ 755.331729] ata1.01: failed to resume link (SControl 0) [ 755.487644] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 755.487656] ata1.01: SATA link down (SStatus 0 SControl 0) [ 755.512053] ata1.00: configured for UDMA/33 [ 755.512332] ata1: EH complete [ 757.163859] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 757.163862] ata1.00: BMDMA stat 0x26 [ 757.163865] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 757.163867] ata1.00: failed command: READ DMA EXT [ 757.163870] ata1.00: cmd 25/00:00:a8:e2:c3/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 757.163870] res 51/84:50:58:e3:c3/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 757.163872] ata1.00: status: { DRDY ERR } [ 757.163873] ata1.00: error: { ICRC ABRT } [ 757.163879] ata1.00: hard resetting link [ 757.481665] ata1.01: hard resetting link [ 758.508650] ata1.01: failed to resume link (SControl 0) [ 758.664486] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 758.664499] ata1.01: SATA link down (SStatus 0 SControl 0) [ 758.688951] ata1.00: configured for UDMA/33 [ 758.689228] ata1: EH complete [ 759.391993] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 759.391997] ata1.00: BMDMA stat 0x26 [ 759.391999] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 759.392001] ata1.00: failed command: READ DMA EXT [ 759.392004] ata1.00: cmd 25/00:80:20:f1:c6/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 759.392004] res 51/84:20:80:f1:c6/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 759.392006] ata1.00: status: { DRDY ERR } [ 759.392007] ata1.00: error: { ICRC ABRT } [ 759.392014] ata1.00: hard resetting link [ 759.711497] ata1.01: hard resetting link [ 760.738482] ata1.01: failed to resume link (SControl 0) [ 760.894348] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 760.894359] ata1.01: SATA link down (SStatus 0 SControl 0) [ 760.918871] ata1.00: configured for UDMA/33 [ 760.919148] ata1: EH complete [ 763.621744] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 763.621748] ata1.00: BMDMA stat 0x26 [ 763.621751] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 763.621753] ata1.00: failed command: READ DMA EXT [ 763.621756] ata1.00: cmd 25/00:08:a8:3f:52/00:00:23:00:00/e0 tag 0 dma 4096 in [ 763.621756] res 51/84:00:af:3f:52/84:00:23:00:00/e0 Emask 0x70 (host bus error) [ 763.621759] ata1.00: status: { DRDY ERR } [ 763.621760] ata1.00: error: { ICRC ABRT } [ 763.621767] ata1.00: hard resetting link [ 763.939391] ata1.01: hard resetting link [ 764.966380] ata1.01: failed to resume link (SControl 0) [ 765.122261] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 765.122272] ata1.01: SATA link down (SStatus 0 SControl 0) [ 765.146748] ata1.00: configured for UDMA/33 [ 765.147108] ata1: EH complete [ 766.145654] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 766.145659] ata1.00: BMDMA stat 0x26 [ 766.145661] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 766.145663] ata1.00: failed command: READ DMA EXT [ 766.145667] ata1.00: cmd 25/00:00:80:48:e1/00:02:1d:00:00/e0 tag 0 dma 262144 in [ 766.145667] res 51/84:80:00:4a:e1/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 766.145670] ata1.00: status: { DRDY ERR } [ 766.145671] ata1.00: error: { ICRC ABRT } [ 766.145678] ata1.00: hard resetting link [ 766.464927] ata1.01: hard resetting link [ 767.491950] ata1.01: failed to resume link (SControl 0) [ 767.647832] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 767.647845] ata1.01: SATA link down (SStatus 0 SControl 0) [ 767.672268] ata1.00: configured for UDMA/33 [ 767.672612] ata1: EH complete [ 767.769304] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 767.769309] ata1.00: BMDMA stat 0x26 [ 767.769311] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 767.769313] ata1.00: failed command: READ DMA EXT [ 767.769317] ata1.00: cmd 25/00:00:80:4e:e1/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 767.769317] res 51/84:80:00:4f:e1/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 767.769318] ata1.00: status: { DRDY ERR } [ 767.769320] ata1.00: error: { ICRC ABRT } [ 767.769326] ata1.00: hard resetting link [ 768.087366] ata1.01: hard resetting link [ 769.114309] ata1.01: failed to resume link (SControl 0) [ 769.270214] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 769.270226] ata1.01: SATA link down (SStatus 0 SControl 0) [ 769.289062] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2) [ 769.289065] ata1.00: revalidation failed (errno=-5) [ 774.265346] ata1.00: hard resetting link [ 774.585041] ata1.01: hard resetting link [ 775.612045] ata1.01: failed to resume link (SControl 0) [ 775.767948] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 775.767960] ata1.01: SATA link down (SStatus 0 SControl 0) [ 775.802713] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2) [ 775.802716] ata1.00: revalidation failed (errno=-5) [ 775.802729] ata1.00: limiting speed to UDMA/33:PIO3 [ 780.763044] ata1.00: hard resetting link [ 781.082750] ata1.01: hard resetting link [ 782.109685] ata1.01: failed to resume link (SControl 0) [ 782.265613] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 782.265624] ata1.01: SATA link down (SStatus 0 SControl 0) [ 782.290123] ata1.00: configured for UDMA/33 [ 782.290468] ata1: EH complete [ 782.550435] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 782.550439] ata1.00: BMDMA stat 0x26 [ 782.550441] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 782.550443] ata1.00: failed command: READ DMA EXT [ 782.550447] ata1.00: cmd 25/00:00:80:59:e1/00:02:1d:00:00/e0 tag 0 dma 262144 in [ 782.550447] res 51/84:30:50:5a:e1/84:01:1d:00:00/e0 Emask 0x70 (host bus error) [ 782.550449] ata1.00: status: { DRDY ERR } [ 782.550450] ata1.00: error: { ICRC ABRT } [ 782.550456] ata1.00: hard resetting link [ 782.869011] ata1.01: hard resetting link [ 783.896003] ata1.01: failed to resume link (SControl 0) [ 784.051917] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 784.051929] ata1.01: SATA link down (SStatus 0 SControl 0) [ 784.076377] ata1.00: configured for UDMA/33 [ 784.076705] ata1: EH complete [ 784.184072] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 784.184075] ata1.00: BMDMA stat 0x26 [ 784.184077] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 784.184080] ata1.00: failed command: READ DMA EXT [ 784.184083] ata1.00: cmd 25/00:00:80:5e:e1/00:02:1d:00:00/e0 tag 0 dma 262144 in [ 784.184083] res 51/84:20:60:5f:e1/84:01:1d:00:00/e0 Emask 0x70 (host bus error) [ 784.184085] ata1.00: status: { DRDY ERR } [ 784.184086] ata1.00: error: { ICRC ABRT } [ 784.184092] ata1.00: hard resetting link [ 784.503447] ata1.01: hard resetting link [ 785.530352] ata1.01: failed to resume link (SControl 0) [ 785.686315] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 785.686327] ata1.01: SATA link down (SStatus 0 SControl 0) [ 785.710784] ata1.00: configured for UDMA/33 [ 785.711070] ata1: EH complete [ 786.211775] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x480900 action 0x6 [ 786.211780] ata1.00: BMDMA stat 0x26 [ 786.211782] ata1.00: SError: { UnrecovData HostInt 10B8B Handshk } [ 786.211785] ata1.00: failed command: WRITE DMA EXT [ 786.211789] ata1.00: cmd 35/00:08:50:6d:55/00:00:27:00:00/e0 tag 0 dma 4096 out [ 786.211789] res 51/84:01:57:6d:55/84:00:27:00:00/e0 Emask 0x70 (host bus error) [ 786.211790] ata1.00: status: { DRDY ERR } [ 786.211791] ata1.00: error: { ICRC ABRT } [ 786.211798] ata1.00: hard resetting link [ 786.529406] ata1.01: hard resetting link [ 787.556448] ata1.01: failed to resume link (SControl 0) [ 787.712362] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 787.712376] ata1.01: SATA link down (SStatus 0 SControl 0) [ 787.736824] ata1.00: configured for UDMA/33 [ 787.737110] ata1: EH complete [ 789.459200] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 789.459204] ata1.00: BMDMA stat 0x26 [ 789.459207] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 789.459209] ata1.00: failed command: READ DMA EXT [ 789.459213] ata1.00: cmd 25/00:e8:28:df:bb/00:00:1d:00:00/e0 tag 0 dma 118784 in [ 789.459213] res 51/84:68:a8:df:bb/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 789.459214] ata1.00: status: { DRDY ERR } [ 789.459216] ata1.00: error: { ICRC ABRT } [ 789.459222] ata1.00: hard resetting link [ 789.778311] ata1.01: hard resetting link [ 790.805290] ata1.01: failed to resume link (SControl 0) [ 790.961205] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 790.961218] ata1.01: SATA link down (SStatus 0 SControl 0) [ 791.045617] ata1.00: configured for UDMA/33 [ 791.045960] ata1: EH complete [ 791.313535] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 [ 791.313539] ata1.00: BMDMA stat 0x26 [ 791.313541] ata1.00: SError: { UnrecovData HostInt 10B8B BadCRC } [ 791.313544] ata1.00: failed command: READ DMA EXT [ 791.313547] ata1.00: cmd 25/00:00:e0:d1:bb/00:01:1d:00:00/e0 tag 0 dma 131072 in [ 791.313547] res 51/84:60:80:d2:bb/84:00:1d:00:00/e0 Emask 0x70 (host bus error) [ 791.313549] ata1.00: status: { DRDY ERR } [ 791.313550] ata1.00: error: { ICRC ABRT } [ 791.313557] ata1.00: hard resetting link [ 791.632505] ata1.01: hard resetting link [ 792.659494] ata1.01: failed to resume link (SControl 0) [ 792.815411] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 792.815424] ata1.01: SATA link down (SStatus 0 SControl 0) [ 792.939751] ata1.00: configured for UDMA/33 [ 792.940044] ata1: EH complete [ 851.472244] ata1.00: exception Emask 0x50 SAct 0x0 SErr 0x480900 action 0x6 [ 851.472250] ata1.00: BMDMA stat 0x26 [ 851.472254] ata1.00: SError: { UnrecovData HostInt 10B8B Handshk } [ 851.472257] ata1.00: failed command: WRITE DMA EXT [ 851.472264] ata1.00: cmd 35/00:08:68:dc:57/00:00:22:00:00/e0 tag 0 dma 4096 out [ 851.472264] res 51/84:01:6f:dc:57/84:00:22:00:00/e0 Emask 0x70 (host bus error) [ 851.472267] ata1.00: status: { DRDY ERR } [ 851.472270] ata1.00: error: { ICRC ABRT } [ 851.472279] ata1.00: hard resetting link [ 851.790087] ata1.01: hard resetting link [ 852.817087] ata1.01: failed to resume link (SControl 0) [ 852.973007] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 852.973021] ata1.01: SATA link down (SStatus 0 SControl 0) [ 852.991734] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2) [ 852.991736] ata1.00: revalidation failed (errno=-5) [ 857.968039] ata1.00: hard resetting link [ 858.287739] ata1.01: hard resetting link [ 859.314778] ata1.01: failed to resume link (SControl 0) [ 859.470687] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 859.470699] ata1.01: SATA link down (SStatus 0 SControl 0) [ 859.495143] ata1.00: configured for UDMA/33 [ 859.495473] ata1: EH complete Code: smart test smartctl 5.43 2012-06-30 r3573 [i686-linux-3.8.0-35-generic] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda (SATA 3Gb/s, 4K Sectors) Device Model: ST500DM002-1BD142 Serial Number: Z6E56314 LU WWN Device Id: 5 000c50 066fce7f0 Firmware Version: KC45 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Fri Jul 11 10:50:09 2014 PHT SMART support is: Available - device has SMART capability. Self-test supported. End_request I/o Error Dev Sr0 Sector Instead of trying to chat with the OP why not try to give a honest answer based on facts? –Bruno Pereira Feb 22 '14 at 20:44 @BrunoPereira my advise to backup is based on facts of errors in his report!

It's a one OS linux now. okMounting local filesystems FailedEnabling local filesystem quotas: FailedEnabling /etc/fstab swaps: Failedand hang at this stage. Host (Gentoo): Vanilla Kernel Sources 2.6.32.7 QEMU-KVM 0.12.2 Guest image is a LVM2 partition (~30Gb) Guest is using virtio-blk Guest (Gentoo): Vanilla Kernel Sources 2.6.32.7 Filesystem is Ext4 Log after copying lot of files: Jan 30 14:06:02 jboss kernel: [ 40.177314] end_request: I/O error, dev vdd, sector 33555759 Jan 30 14:06:02 jboss kernel: [ 40.177314] Buffer I/O error on device vdd1, logical block 4194462 Jan 30 14:06:02 jboss kernel: [ 40.177314] lost page write due to I/O error on vdd1 ...snip... see https://bugs.launchpad.net/ubuntu/+source/qemu-kvm/+bug/574665 and http://bugs.gentoo.org/show_bug.cgi?id=321005 If you would like to refer to this comment somewhere else in this project, copy and paste the following link: masc - 2010-06-16 just verified the fix, this bug is resolved.

I enabled standby timeouts before the IO errors came along, so to me, it sounds like ZFS or ZoL doesn't deal with spindown or standby very well? Is there a way to be certain? SCT Data Table supported. Now reboot the Linux server: # reboot Share this tutorial on:TwitterFacebookGoogle+Download PDF version Found an error/typo on this page?About the author: Vivek Gite is a seasoned sysadmin and a trainer for the Linux/Unix & shell scripting.

Running badblocks directly gives a list longer than one screen, but probably several hundert damaged sectors - therefore I'm not eager to try the manual option from http://smartmontools.sourceforge.net/badblockhowto.html either.Is there another xfs utility I might try? its very critical server for the company. no Inode 86376707, i_blocks is 1432952, should be 0. Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the top SSD had I/O errors but smartctl not showing anyting unusual up vote 0 down vote favorite Linux 4.6.4 reported drive I/O errors on my root partition, which is an Intel 520 Series 256GB SSD.

Auto Offline data collection on/off support. Join Date Feb 2007 Location West Hills CA Beans 10,050 DistroUbuntu 14.04 Trusty Tahr Re: Error ID I/O error, dev sda, sector It's possible that a bad cable or poor solder connection on the motherboard or the hard disk is causing the problem. In the thread I linked above, someone recommended doing a "Complete drive test" with a certain Ultimate Boot CD. fsnotify+0xfb/0x140 [ 720.380292] [] blkdev_put+0xb/0x10 [ 720.380295] [] blkdev_close+0x2e/0x50 [ 720.380304] [] fput+0xda/0x1f0 [ 720.380307] [] fput+0x1d/0x30 [ 720.380315] [] filp_close+0x58/0x90 [ 720.380329] [] put_files_struct+0x77/0xe0 [ 720.380333] [] exit_files+0x4f/0x60 [ 720.380339] [] do_exit+0x14b/0x360 [ 720.380343] [] ?

Or is there some tool in the arch install iso - or (since you can use pacman from the livesystem without problems) another arch package I could use to determine what's happening with my harddirive.Btw: what exactly does this mean that the hard drive 'dies'? where to start? You signed out in another tab or window. Offline #2 2013-05-19 00:08:25 nagaseiori Member Registered: 2012-09-22 Posts: 71 Re: Harddisk problem: ata1.00: end_request: I/O error, dev sda, sector ...

SCT capabilities: (0x0021) SCT Status supported. If Selective self-test is pending on power-up, resume after 0 minute delay. kthread+0x0/0xa0 Mar 30 00:26:42 jhdhr kernel: [] ? General Purpose Logging supported.

Have you been having power failures lately? One thing worth mentioning : the block devices used are DRBD backed. Thanks in advance. Reload to refresh your session.