Fax Speed Fax Setup menu. The product has canceled sending the fax. Ask the remote machine user to resend the fax. Try to receive the fax when telephone line conditions have improved. Source
There might be no solution because the remote machine could be defective. 381 ECM The remote machine failed to respond to a fax command from the local machine because the connection was interrupted. Make sure the remote machine can accept and use polling. Select a slower reception speed. Re-sending temporarily reduces the fax speed. ● Disconnect the product telephone cord from the wall, connect a telephone to the phone jack on the ● wall, and try making a call. great post to read
Error Correction feature can reduce image quality. The click, heard for an incoming call, is actually a momentary disconnect of the line. NOTE: If errors occur every time a fax is sent or received, go to Troubleshooting Fax Transmission and Reception Issues . Disable ECM.
error Fax delayed – Send memory full Fax is busy Canceled send Fax is busy Redial pending ENWW OK to resume or by pressing Description A fax communication error occurred between the product and the sender or receiver. Ask the sender what speed the fax machine is using to send, and then reconfigure the local machine to receive at that speed, if possible. Check that the Redial if busy option is enabled. https://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-6500A-plus-recieve-error-code-252-and-232-when-recieving/td-p/1207303 The power at the remote machine was interrupted, or deliberately turned off causing the fax session to be interrupted.
Enable remote diagnostics on the remote machine, if available. 315 The local machine attempted to initiate a remote diagnostic session, but detected that the remote diagnostic version supported by the remote machine is incompatible. Fax quality might be degraded. No action required. 311 The user of the local machine pressed the Stop key, causing the session to be prematurely terminated before all pages have been sent. If the remote machine ends the call just as the local machine starts reception, reduce the ring count on the local machine answering setting.
More Info Sign In Upload Page of 292 Go Download Table of ContentsContents Print This PagePrint ShareShare Url of this page: HTML Link: Bookmark Comment Manuals Brands HP Manuals All in One Printer Color LaserJet CM2320 - Multifunction... Enable or disable the ECM setting. Fax memory is full. Troubleshooting toolspage 377................................................................................................................................................................
Have the sender send from a different fax machine to see if the error clears. 242 The remote fax machine is attempting to receive instead of send. http://orgias.org/hp-officejet/hp-officejet-pro-l7500-series-error.html Thank you! Register · Log In HP Support Forum Home > Printers > Scanning / Faxing > HP 6500A plus recieve error code 252 and 232 when recieving ... Set the host machine to receive at a slower transmission speed. These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line).
Plug the product phone cord into a jack for another phone line. If the document is large, ask the remote user to re-send the document as two or more smaller documents. Error Code(s) Definitions/Causes Solutions 325 ECM 326 ECM 327 ECM 328 ECM Telephone line conditions were very poor.
or the support setting. If faxes are successfully sent to and received from other machines, but not this particular remote machine, then the issue is probably a problem with the remote machine. 252 Telephone line conditions were too poor to receive a fax. From the Home screen on the product control panel, touch the Setup b. http://orgias.org/hp-officejet/hp-officejet-pro-l7500-error-codes.html Try sending at a lower transmission speed. 356 357 358 359 361 362 ECM 363 ECM 364 ECM 365 ECM 366 ECM The remote user pressed the Stop key, causing the session to be terminated.
If not, reconfigure the local machine for a normal fax transmission. Restore password × Upload manual upload from disk upload from url Thank you for your help! The call-waiting service can cause this error. Set the host machine to receive at a slower transmission speed.
Error Code(s) Definitions/Causes Solutions 200 The fax session completed without errors. The fax line to which you were sending a fax was busy. Error Correction feature to prevent automatic error correction. What Our Users Say Press & Media Contacts Advertising DMCA Policy Brands × Login Login to ManualsLib Don't have an account?
Print This PagePrint ShareShare Url of this page: HTML Link: Bookmark Manuals Brands HP Manuals All in One Printer LaserJet Pro 500 User manual HP LaserJet Pro 500 User Manual: Solve Problems Sending Faxes; An Error Message Displays On The Control Panel; The Communication Error Message Appears Hp laserjet pro 500 color mfp m570 - user guide. a. Depending on your printer, a fax error code might display on the printer control panel or on a fax history report. What Our Users Say Press & Media Contacts Advertising DMCA Policy Brands × Login Login to ManualsLib Don't have an account?
PDF Manual UserManual_English.pdf.... More Info Sign In Upload Page of 264 Go Download Table of ContentsContents TroubleshootingTroublesh..