Home > Hp Laserjet > Hp P3005 Error Codes

Hp P3005 Error Codes


by unknown on Nov 18, 2009 at 8:13am Add comment Please sign in to comment 0 So if out of warranty try the baking method. If a 68.0 error persists, contact HP Support. You can try reducing the DPI or unticking the collate option in the printer driver. Recent products: HP LaserJet P3005 Printer series Troubleshoot a problem Help Other Knowledge Base options Search HP Support Center Most viewed solutions Advisories, bulletins & notices Manuals Setup & install Learn & use Perform maintenance Upgrade & migrate Related links Buy replacement parts SAP device types Windows 10 support Windows 8/8.1 support Windows 7 support Selecting the Correct Printer Driver More HP support resources Not the product you are looking for? have a peek here

Ensure that the media-size window on the front of the tray matches the size setting on the control panel. or Press (HELP) for help. Error messages Error messages communicate that some action must be performed, such as adding paper or clearing a jam. Sorry for this long story but it may be worth $300 to someone else. click

Hp P3005 Memory Error Replace Dimm

Step 4: Does the job print as expected? Hypothesis - one of the solder joints is faulty? They trusted HP then & bought another $ million worth of HP stuff.

Was the information on this page helpful? Try a different driver. The only thing I have heard of is sometimes and I think only on the P2105 board there is a bit of tape used to cover some chips by the expansion memory slot that needs to be removed as it will melt. Hp Laserjet P3005 Memory If you want take a look at the COOPER Hand Tools Website http://www.cooperhandtools.com/brands/weller/index.cfm or if you can read german here: http://www.jbctools.com/pdf/Catalogos/Advanced/CatAdvAle.pdfYou can find there a lot of special desoldering heads.

Even better still i can use a heat gun.I do not think it will work because the chip is a samsungchip on later boards. Hp Laserjet P3005 Hangs During Startup The message indicates the type and size of media for which the tray is currently configured. In the PAPER HANDLING menu, configure the tray for the correct size. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00764927 Lift the metal flap, and then remove any media remaining.

Press (SELECT) to save the appropriate language as the new default. P3005 Formatter Board Press (SELECT) to print from another tray. On the SYSTEM SETUP submenu (on the CONFIGURE DEVICE menu), set PERSONALITY=AUTO. She told me that the service note treats only the rfu-error and not my "freezing-problem".

Hp Laserjet P3005 Hangs During Startup

Do you wish to proceed to the home page of the new product? https://www.marketpoint.com/49x-service-error-hp-laserjet-models-p3005 If the message persists, contact HP Support. 22-USB I/O BUFFER OVERFLOW alternates with To continue press (SELECT) The device's USB buffer has overflowed during a busy state. Hp P3005 Memory Error Replace Dimm Reinstall the duplexer. Hp P3005 Cold Reset Whoever came up with this deserves a medal and their picture in the paper.

Please wait while we process your request. navigate here Thanks so much! It was brand new and once it finished booting, was solidly up for weeks at a time, so no real problem. Now, check for the latest firmware image version near the bottom of the page. Hp Laserjet P3005 Troubleshooting

This product has been successfully added to your profile. I have boxes of these faulty formatter boards so to sacrifice a couple of boards is not a problem. RFU LOAD ERROR An error has occurred during a firmware upgrade. Check This Out Load media into tray 1, and press (SELECT) to continue.

I think I'll take it home and see what happens. - opcso 0 After reading all the suggestions about putting the board in tothe oven, I finally had to try it....I had 5 defective formatter boards (HP LJ p2015) and did several tests in the oven...After putting it in for 9 minutes at 210 degrees C, 3 of the boards started right up and still are working ok!!So, everyone out there with defective formatter boards (P2015 orP3005) just try it and let me know if it did work for you also. Hp Laserjet P3005 Replace Dimm 1 If the device is on a network, print a configuration page. (See Control-panel messages in the User Guide.) If an HP Jetdirect print server is installed, a Jetdirect page also prints. Printer freezes, cant get into control panel, sometimes MEM TEST FAILURE REPLACE DIMM 0, WARR.

If the message persists, contact HP Support. 49.XXXXX ERROR alternates with To continue turn off then on A critical firmware error has occurred.

The device might have received a nonstandard PS code. During this time, no jobs can be printed. After extensive discussions with HP they have one solution only. Hp Laserjet P3005 Printing Blank Pages I thought the idea of putting the boards in an oven was a little extreme but then again what do you have to lose?

If the problem persists, contact HP Support. Seems to work so you have nothing to lose. by cscotech on Apr 7, 2008 at 10:12am Add comment Please sign in to comment 0 Well from your earlier post your serial # does fall within the list covered by the service note. this contact form by moe on Sep 17, 2009 at 10:13am Add comment Please sign in to comment 0 Thanks for the suggestion!

Then the dreaded sleep mode that wouldn't wake... The main logic chip runs so hot that the solder connections crack. Checking paper path The engine is turning the rollers to check for possible jams. Reinstall the print cartridge, and then close the top cover.

Since I started baking, I had one JetDirect card fail again and that was after 18 months. I first tested that it was the formatter board that was the problem by removing the LHS of the printer with a flat screwdriver to prise it off at the back (the whole side not just the hatch) and pressing the 'print without formatter' button hidden just below the bottom right of the formatter board with a pen - this worked (page with horizontal lines came out) so formatter was the problemI took off the formatter and put it in the oven for 8 minutes at 190 celcius (375 farenheit) after cooling I replaced it and so far the printer is now working fine. Both do not satisfy the SN requirement from the Service Bulletin, I am going to order new formatter boards for both.The updated Part Number for today on Part Surfer is: Q7847-61006On chip was an ST, one was a Samsung. He said there is a problem with the formatter board and gave me also the part number of a new board.

by dmzcompute on Oct 16, 2009 at 8:12pm Add comment Please sign in to comment 0 I had some issues with a color 2600 today. Lower rear door completely, and then remove all media found. Printing can continue, but unexpected behavior could result. The job is cancelled and no pages are printed.

No action necessary. The message disappears after a few seconds, and the device returns to Ready or BUSY state. by cscotech on Apr 8, 2008 at 12:18pm Add comment Please sign in to comment 0 An ST Chip means its a THOMSON SEMICONDUCTOR chipThe Toshiba chip clearly says TOSHIBA.I got a new board with an ST chip a short while agoand the board seemed to work ok but the ones withthe SAMSGUNG chips have always worked consistantly.Anybody ever tried to replace chips like these.I wonder could a component level repair be possible?Someone do a google on the part number and checkavailability !! Print a configuration page to see current tray settings.

The device might have received PS code although it is set to PCL. Check that you are using the correct device driver.