Home > Hp Laserjet > Hp Laserjet 4 Plus Error 51

Hp Laserjet 4 Plus Error 51

by dmzcompute on Jan 18, 2004 at 4:40pm Add comment Please sign in to comment Please sign in to comment HP LaserJet 4 Buy discount ink Buy this printer More HP questions © Copyright 2011-2016, FixYourOwnPrinter.com, Inc. If the error persists, replace the laser/scanner assembly. Turn the printer off, and then turn the printer on. 2. Try the DIMM in another slot. (The firmware DIMM must remain in slot #4—the lowest DIMM slot.) 3. have a peek at this web-site

The electronics on that board detects the pulse from that photodiode and provides a sync signal for the data sent to the laser So the fault can be the laser, the scanner motor, assorted optical bits, the photodiode, or bits on the DC controller board. Sauter 632,509 views 7:16 Loading more suggestions... Start be reseating the 2 cables (one under the flap) that go to this unit. Defective dc controller pca. this website

Temporary laser ass'y error.Turn printer on and off 2. Loading... Replace the D.C. If so contact hp customer care.

HP LASER PRINTER 4345MFP, 5025MFP, 5035MFP ERROR 51.XY 1. check out the article below which explains the problem and has a link to replacement instructions for changing the laser scanner.http://www.printertechs.com/printer-troubleshooting/462-51-00-10-error-on-hp-laserjet-m601-m602-m603 Reply 0 0 « Message Listing « Previous Topic Next Topic » Related Documents HP Printers - Using HP Diagnostic Tools for HP Printers in WindowsHP Printers - After Windows 10 Upgrade, Printer Does Not PrintHP Printers - Using Google Cloud Print with Your HP PrinterHP Printers - Printer is Offline (Windows)HP Printers - Resolving Printhead Problems and Ink System Failure Videos English Open Menu English Deutsch Español Français Português 中文 한국어 † The opinions expressed above are the personal opinions of the authors, not of HP. Its the Laser Scanner Assembly which is faulty.If its new within an year HP will replace the faulty part without any charges.RegardsGC Reply 0 0 nehasinha Top Student Posts: 5 Member Since: ‎09-21-2012 Message 4 of 10 (18,505 Views) Report Inappropriate Content Re: HP M602 Error - 51.00.10 Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content ‎05-09-2013 03:20 AM This error is because of faulty laser scanner assembly after replacing this part issue will be resolved.Thanks and RegardsNeha Sinha Reply 0 0 Ram_g Honor Student Posts: 4 Member Since: ‎09-20-2012 Message 5 of 10 (18,493 Views) Report Inappropriate Content Re: HP M602 Error - 51.00.10 Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content ‎05-09-2013 07:34 AM You can try checking the connection in DC controller and reconnect the connectorsin laser scanner. The printer stops before the paper comes out, goes to 02-warming up and a paper with three black banners comes out.This happens when the printer is On for about one hour, before this the printer works fine.I have tried the following:- changed the fuser with one from another printer- changed the power-cable- changed the printer-cableI hope someone knows what could be the problem with my printer.Thanks Respond to this 0 Most likley it is the laser/scanner assembly.

Put your IR sensor on the end of that and test again. P/N RG1-0908-000CN. If the error persists, replace the main motor. Temporary error. / Bad toner cartridge 2.

Reconnect connectors (J86 and J93) on the DC controller.3. Reseat the connectors between the laser/scanner and the DC controller PCA (J83 and J84) 4. HP LASER PRINTERS 1100, 2100, 4000, 4050 1.Beam detect error.2. Unplug the cable from the laser PCB, power up the printer and try a test page.

Turn on, and try to print a test page - which will fail. Poor dc voltage. 5. Don't replace: rejuvenate! Defective laser scanner assembly. 4.

If not, find out why not. http://orgias.org/hp-laserjet/hp-laserjet-4-22-par-io-error.html The user is thinking of multifunction printers which also have a scanner which is used to duplicate a sheet for faxing, copying or sending to a computer folder. Defective laser scanner assembly. 4. If not, we'll debug that.

Let me explain what that means: The laser beam is reflected off a spinning hexagonal (I think) mirror, and scanned across the drum. BrokenPrinter1 18,622 views 2:36 Computer Upgrades & Repairs : How to Clean a Laser Printer - Duration: 1:34. Watch Queue Queue __count__/__total__ Find out whyClose how to hp laserjet 4, 4M, 4 Plus, 4M Plus, 5, 5M, 5N fuser removal and install BrokenPrinter.com BrokenPrinter1 SubscribeSubscribedUnsubscribe3,8733K Loading... Source BrokenPrinter1 5,367 views 8:52 HP LASERJET SERVICE IN 5 MINUTES - Duration: 4:38.

controller. Replace Laser Diode Assembly. Uploaded on Sep 30, 2011http://www.brokenprinter.com/laserjet...How to install and remove a fuser on a hp laserjet 4 4plus or laserjet 5 printers RG5-0879 and RG5-0454 C2001-69012, C2037-67912 Category Education License Standard YouTube License Show more Show less Loading...

We tear apart, rebuild, and test HP LaserJets and LaserJet assemblies all day.

Defective toner cartridge. 2. An easy fix! - Duration: 7:47. Check the main motor’s cable to ensure that it is seated properly. 4. We have tried moving the printer to a different network port hoping it was something with the data that it was recieving.

Bad laser ass'y HP LASER PRINTER 2, 2D, 3, 3D 1. The page containing the error will automatically be reprinted. 1. HP LASER PRINTER 3050, 3052, 3055, 3390, 3392 1. http://orgias.org/hp-laserjet/hp-laserjet-iip-error-12.html The last possibility is that the laser isn't coming on for some reason.

longlifeprinters9 9,460 views 10:12 RG5-0886 fix the Accordion style paper jam hp laserjet 4plus or 5 PART 1 - Duration: 5:36. Problem with fiber optic cable. 2. If the error persists, replace the laser scanner assembly.HP LASER PRINTERS 4200, 4300, 4250, 4350 ERROR 51.XX1. Privacy Policy Terms of Use S.E.R.

Thank you! Register · Log In HP Support Forum Home > Printers > Inkjet > HP M602 Error - 51.00.10 HP Support Forums Join in the conversation. Reconnect the fiber to J201 and hook a logic probe or 'scope to TP208 on the DC controller. If you think you have received a fake HP Support message, please report it to us by clicking on the blue “Report Inappropriate Content” button above the message. Defective laser scanner assembly.2.

Replace Laser/Scanner Assembly. If the error persists, replace the laser/scanner.HP LASER PRINTER 3300, 33801. Temporary error. 2. Defective laser scanner assembly.

Error code C - No Cyan Color3. Technicians answer the phone and help customers with printer problems. Check the power at the customer’s location. 2. Error code Y - No Yellow color HP COLOR LASER PRINTER 8500 1.

Faulty laser scanner cable connectors. 2. Bad cable from laser scanner ass'y to D.C. Controller. controller.

Sign in to add this to Watch Later Add to Loading playlists... Printer has a beam detect error2.