After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 08 ff ff ff 4f 00 05:40:19.848 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 05:40:19.485 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 05:40:19.464 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 05:40:19.464 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 05:40:19.067 READ FPDMA QUEUED Error 3277 occurred at disk power-on lifetime: 6591 hours (274 days + 15 hours) When the command that caused the error occurred, the device was active or idle. It runs the setup(amost finalizes installation) and during middle of the setup, it goes to the Blue screen "BSOD". Connect with top rated Experts 17 Experts available now in Live! Buy Undelete and you'll never again be at the mercy of lost data. this content
The finishing touches Restoring the partitions from the dd image I took when the drive was already failing meant two things: That some files would contain garbage, as they could not be read when the backup was taken. Being based on the "dd" command itself, I think ddrescue can be equally dangerous if used incorrectly. PS: I have personally found testdisk/photorec to work better when running on Linux. Go to one recovery module. https://www.experts-exchange.com/questions/20699731/Disk-I-O-Error-Hard-Drive-Failing.html
I would prefer to ask there for a Windows problem, rather than here. If you're keeping important data your best bet is a data recovery company. Never try to rescue a r/w mounted partition. what failed exactly on my system?
If it is, un-mount it from within nautilus (or whatever file manager you have), or with the command - sudo umount /dev/sda3 ..assuming that /dev/sda3 is the source partition which you have to create image of. No your missing my point, have you over written the now freed up space on your internal laptop drive ?? sudo apt-get install ntfs-3g sudo ntfsfix /dev/sd?? How To Fix I/o Device Errors Step-by-step But this is what it looks like on my now healthy drive: smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11-2-amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 10% 1288 - # 2 Extended offline Completed without error 00% 1264 - # 3 Extended offline Completed without error 00% 1210 - When it found an error, it had a Status similar to detected errors, a number in LBA_of_first_error indicating the sector with an error, and a Remaining of like '90%', indicating that 90% of the drive still had to be scanned.
The very purpose of creating images like this is to prevent any further loss due to physical wear & tear. You shouldn't need to format at all, not that time you mentioned nor again, that is lost and recreated as per the image. varunendraJune 26th, 2013, 07:49 PMWhen i accessed my external hard drive again, it was like nothing happened and all the files were fine. Extended self-test routine recommended polling time: ( 48) minutes.
Auto Offline Data Collection: Disabled. How To Fix I/o Device Error Usb Drive If i try to open a folder with a bad document directly in it (not in a subfolder), an error message displays "Failed to open directory "Folder" and it's because of the bad file. watsons torment28-09-2011, 18:06its a seagate drive then, see what seatools from the manufacturer says (http://www.seagate.com/www/en-us/support/downloads/seatools) if that reports the drive as fucked then no software is going to fix it. NikThJune 16th, 2013, 10:44 AMDo NOT run chkdsk on a drive with bad sectors, it will just make things worse.
You can also have a look at https://help.ubuntu.com/community/DataRecovery I'll see what I can do regarding GNU ddrescue. You're image you have of 278GB is not complete, dd does not work well with bad sectors/faulty drives. Hard Drive Io Error Repair Auto Offline data collection on/off support. How To Recover Data From I/o Device Error That's about what happened the last time I upgraded my laptop.
To make it work on the image, you have to run it with the path to the image as its option, like I posted in post #9 earlier (it was for Ubuntu however). Is there anyway i can simply boot from this disc without reinstalling? Some things might already not be possible to recover. I know only chkdsk as a powerful tool and the one (MS official) to correct such errors. I O Device Error External Hard Drive Western Digital
mipsJune 15th, 2013, 05:29 PMSo this is a NTFS filesystem partition, correct ? But this kind of behaviour can also indicate a hardware failure, ranging from a mere loose connection to a failing drive or motherboard (the I/O controller) or memory leakage. Mystical Guest I recently had to reinstall my OS using an image file created by drive image due to my primary disk reporting a SMART error. have a peek at these guys Step1.
What you are asking for is the job of data recovery software and it can be done reliably only if the partition table itself is intact (I'm not sure about that in your case). I O Device Error Windows 10 He > reports it was starting Windows XP then getting BSOD error. > > A boot in safe mode shows that it was stopping on mup.sys. > > Anyway we put the HDD in my PC to copy the data, but my PC says drive > is not formatted, format now? > > So we had a look at the HDD with OnTrack Easy Recovery and got back > most of the important data. Best Regards, Engellan 0 Message Author Comment by:SKG2003-08-06 When I tried running Error Checking on it, it just froze at the beginning.
has been increased to work 100 Mb at a time, and conv=... My conclusion was that starting a selftest was causing something in the firmware or the drive to crash, and this is roughly when I decided to file a ticket with Corsair, and ask for an RMA for the SSD. the long generic diagnostic seagate test has racked up 60 errors so far 63 now lol.....66 now.... The Request Could Not Be Performed Because Of An I/o Device Error External Hard Drive Mailmonkey28-09-2011, 18:00Ran a diagnostic on the drive from the OnTrack Easyrecovery...not looking good "Running Full Diagnostic Test...
well, it requires Windows. They will only tell you (after several hours) what you already know: your drive is having problems reading some sectors. Posted on 2003-08-04 Storage 3 Verified Solutions 11 Comments 40,487 Views Last Modified: 2011-08-18 I have an IBM Deskstar Hard Drive, 40GB, 7200RPM. A Windows partition.
A small windows will appear asking if you want to copy or move. Unfortunately, there is no other way to tell photorec to do a partial scan of a drive (apart from choosing to scan only "free space" which is helpful in recovering deleted files). * Otherwise, you may choose to 'exclude' certain file types which you are not interested in, hoping it may help skipping some problematic blocks. I just noticed this by peeking in the source code, t... I was told i could go back to this if anything were to go wrong when trying to repair the original files.